Siemens SCALANCE XB-200 Configuration Manual page 212

Configuring with Web Based Management
5.5 The "Layer 2" menu
Description of the displayed boxes
The table has the following columns:
● Select
Select the row you want to delete.
● Port
Shows the virtual port number of this link aggregation. This identifier is assigned internally
by the firmware.
● Link Aggregation Name
Shows the name of the link aggregation. This name can be specified by the user during
configuration. The name is not absolutely necessary but can be useful to distinguish
between the various link aggregations.
● MAC Address
● Status
Enable or disable link aggregation.
● LACP
– On
– Off
● Frame Distribution - Destination&Source MAC
The distribution of packets to the individual links of a aggregation is based on a
combination of the destination and source MAC address.
● VLAN Mode
Specify how the link aggregation is entered in a VLAN:
– Hybrid
– Trunk
212
Shows the MAC address.
Enables the sending of LACP frames.
Disables the sending of LACP frames.
The link aggregation sends tagged and untagged frames. It is not automatically a
member of a VLAN.
The link aggregation only sends tagged frames and is automatically a member of all
VLANs.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04