Siemens SCALANCE XB-200 Configuration Manual page 248

Configuring with Web Based Management
5.7 The "Security" menu
● Password Policy
Shows which password policy is being used when assigning new passwords.
– High
– Low
● New Password
Enter the new password for the selected user.
● Password Confirmation
Enter the new password again to confirm it.
Procedure
Note
When you log in for the first time or following a "Restore Factory Defaults and Restart", with
the preset user "admin" you will be prompted to change the password.
The factory setting for the password when the devices ship is as follows:
• admin: admin
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this change is saved immediately.
1. Enter the password for the currently logged in user in the "Current User Password" input
box.
2. In the "User Account" drop-down list select the user whose password you want to
change.
3. Enter the new password for the selected user in the "New Password" input box.
4. Repeat the new password in the "Password Confirmation" input box.
5. Click the "Set Values" button.
248
Password length: at least 8 characters, maximum 128 characters
at least 1 uppercase letter
at least 1 special character
at least 1 number
Password length: at least 6 characters, maximum 128 characters
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04