Versions - Siemens SCALANCE XB-200 Configuration Manual

Configuring with Web Based Management
5.3 The "Information" menu
5.3.2

Versions

Versions of hardware and software
This page shows the versions of the hardware and software of the device. You cannot
configure anything on this page.
Description of the displayed values
Table 1 has the following columns:
● Hardware - Basic Device
Shows the basic device.
● Name
Shows the name of the device or module.
● Revision
Shows the hardware version of the device.
● Order ID
Shows the article number of the device or described module.
Table 2 has the following columns:
● Software
– Firmware
– Bootloader
– Firmware_Running
● Description
Shows the short description of the software.
50
Shows the current firmware version. If a new firmware file was downloaded and the
device has not yet restarted, the firmware version of the downloaded firmware file is
displayed here. After the next restart, the downloaded firmware is activated and used.
Shows the version of the boot software stored on the device.
Shows the firmware version currently being used on the device.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04