Siemens SCALANCE XB-200 Configuration Manual page 182

Configuring with Web Based Management
5.5 The "Layer 2" menu
● Priority
Select a priority to be forced for the VLAN. The selected priority is entered in all incoming
frames of this VLAN. The incoming frames are processed further by the switch according
to the selected priority.
If you select "Do not force", the priority of the frames remains unchanged.
● List of ports
Specify the use of the port. The following options are available:
– "-"
– M
– R
– U (uppercase)
– u (lowercase)
– F
– T
Changing Base bridge mode
VLAN-unaware (802.1D transparent bridge) → VLAN-aware (802.1Q VLAN bridge)
If you change the Base bridge mode from VLAN-unaware to VLAN aware, this has the
following effects
● All static and dynamic unicast entries are deleted.
● All static and dynamic multicast entries are deleted.
● With spanning tree you can set the following protocol compatibility: STP, RSTP and
MSTP.
182
The port is not a member of the specified VLAN.
With a new definition, all ports have the identifier "-".
The port is a member of the VLAN. Frames sent in this VLAN are forwarded with the
corresponding VLAN tag.
The port is a member of the VLAN. A GVRP frame is used for the registration.
The port is an untagged member of the VLAN. Frames sent in this VLAN are
forwarded without the VLAN tag. Frames without a VLAN tag are sent from this port.
The port is an untagged member of the VLAN, but the VLAN is not configured as a
port VLAN. Frames sent in this VLAN are forwarded without the VLAN tag.
The port is not a member of the specified VLAN and cannot become a member of this
VLAN even if it is configured as a trunk port.
This option is only displayed and cannot be selected in the WBM.
This port is a trunk port making it a member in all VLANs.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04