Configuring with Web Based Management
5.5 The "Layer 2" menu
5.5.4.2
GVRP
Configuration of GVRP functionality
Using a GVRP frame, a different device can register at the port of the device for a specific
VLAN ID. A different device, can, for example be an end device or a switch. The device can
also send GVRP frames via this port.
On this page, you can enable each port for GVRP functionality.
Description of the displayed boxes
The page contains the following boxes:
● GVRP
Enable or disable the GVRP function.
Table 1 has the following columns:
● 1st column
Shows that the settings are valid for all ports of table 2.
● Setting
Select the setting from the drop-down list. You have the following setting options:
– Enabled
– Disabled
– No change
● Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
184
Enables the sending of GVRP frames.
Disables the sending of GVRP frames.
No change to table 2.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04