Cos Port Remap - Siemens SCALANCE XB-200 Configuration Manual

Steps in configuration
1. Select the required Trust Mode from the drop-down list.
2. Click the "Set Values" button.
5.5.2.5

CoS Port Remap

Changing priority when sending
On this page depending on the priority when receiving, you can change the priority of a
frame with which it is sent.
Description of the displayed boxes
The page contains the following boxes:
● CoS Remap
Enable or disable frames being sent with changed priorities according to Table 2.
Table 1 has the following columns:
● Port
Shows that the settings are valid for all ports of table 2.
● Priority 0 - 7
The priority in the column stands for the priority with which a frame is received.
– 0 - 7
– No Change
● Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Select the priority with which a frame will be sent.
No change in table 2.
Configuring with Web Based Management
5.5 The "Layer 2" menu
177