Authenticator - Siemens SCALANCE XB-200 Configuration Manual

Configuring with Web Based Management
5.7 The "Security" menu
5.7.4.3 802.1x Authenticator
Setting up network access
An end device can only access the network after the device has verified the login data of the
device with the authentication server. The authentication can be via 802.1X or the MAC
address.
When authenticating using 802.1X both the end device and the authentication server must
support the EAP protocol (Extensive Authentication Protocol).
Enabling authentication for individual ports
By enabling the relevant options , you specify for each port whether or not network access
protection according to IEEE 802.1X is enabled on this port.
Figure 5-11 802.1x Authenticator - first part of the table
254
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04