Siemens SCALANCE XB-200 Configuration Manual page 54

Configuring with Web Based Management
5.3 The "Information" menu
Description of the displayed values
Severity Filters
You can filter the entries in the table according to severity. Select the required entries in the
check boxes above the table.
● Info
When this parameter is enabled, all entries of the category "Info" are displayed.
● Warning
When this parameter is enabled, all entries of the category "Warning" are displayed.
● Critical
When this parameter is enabled, all entries of the category "Critical" are displayed.
To display all entries, select either all of them or leave the check boxes empty.
The table has the following columns:
● Restart
Counts the number of restarts since you last reset to factory settings and shows the
device restart after which the corresponding event occurred.
● System Up Time
Shows the time the device has been running since the last restart when the described
event occurred.
● System Time
If the system time is set, the date and time are also displayed at which the event
occurred.
● Severity
Sorts the entry into the categories above.
● Log Message
Displays a brief description of the event that has occurred.
Description of the buttons and input boxes
"Clear" button
Click this button to delete the content of the event log file. All entries are deleted regardless
of what you have selected under "Severity Filters".
The display is also cleared. The restart counter is only reset after you have restored the
device to the factory settings and restarted the device.
Note
The number of entries in this table is restricted to 1200. The table can contain 400 entries for
each severity. When this number is reached, the oldest entries of the relevant severity are
discarded. The table remains permanently in memory.
54
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04