Rate Control - Siemens SCALANCE XB-200 Configuration Manual

Configuring with Web Based Management
5.5 The "Layer 2" menu
Table 2 has the following columns:
● Port
Shows all available ports. The port is made up of the module number and the port
number, for example port 0.1 is module 0, port 1.
● Priority 0 - 7
The priority in the column stands for the priority with which a frame is received.
In the drop-down list select the priority with which a frame will be sent.
Steps in configuration
1. Select the "CoS Remap" check box.
2. Using the drop down lists select the priority for sending for each receive priority per port.
3. Click the "Set Values" button.
5.5.3

Rate Control

Limiting the transfer rate of incoming and outgoing data
On this page, you configure the load limitation for the individual ports. You can specify the
category of frame for which these limit values will apply.
178
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04