Siemens SCALANCE XB-200 Configuration Manual page 146

Configuring with Web Based Management
5.4 The "System" menu
● OperState
Displays the current operational status. The operational status depends on the configured
"Status" and the "Link". The available options are as follows:
– up
– down
– not present
● Link
Shows the connection status to the network. With the connection status, the following is
possible:
– up
– down
● Mode
Shows the transfer parameters of the port.
● Negotiation
Shows whether the automatic configuration is enabled or disabled.
● Flow Ctrl. Type
Shows whether flow control is enabled or disabled for the port.
● Flow Ctrl.
Shows whether flow control is working on this port.
● MAC Address
Shows the MAC address of the port.
146
You have configured the status "enabled" for the port and the port has a valid
connection to the network.
You have configured the status "disabled" or "Link down" for the port or the port has
no connection.
With modular devices, this status is displayed when, for example, no media module is
inserted.
The port has a valid link to the network, a link integrity signal is being received.
The link is down, for example because the connected device is turned off.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04