Siemens SCALANCE XB-200 Configuration Manual page 162

Configuring with Web Based Management
5.4 The "System" menu
● Custom Maximum Power [W]
Enter the maximum power that a port makes available to supply a connected device.
This value is only taken into account when the "Use Custom Maximum Power" check box
is selected.
If "No Change" is entered, the entry in table 2 remains unchanged
● Copy to Table
If you click the button, the settings are adopted for all ports of table 2.
Table 2 has the following columns:
● Port
Shows the configurable PoE ports.
The port is made up of the module number and the port number, for example port 0.1 is
module 0, port 1.
● Setting
Enable the PoE power supply for this port or interrupt it.
● Priority
From the drop-down list, select which priority this port will have for the power supply.
The following settings are possible, in ascending order of relevance:
– Low
– High
– Critical
If the power of the connected power supply is inadequate to supply all connected
devices, devices with a higher priority are given preference.
If the same priority is set for two ports, the port with the lower number will be preferred
when necessary.
● Type
Here, you can enter a string to describe the connected device in greater detail. The
maximum length is 255 characters.
● Use Custom Maximum Power
If you enable this check box for a port, the user-defined maximum power is used.
162
Low priority
Medium priority
High priority
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04