5.3.9
Unicast
Status of the unicast filter table
This page shows the current content of the unicast filter table. This table lists the source
addresses of unicast address frames. Entries can be made either dynamically when a node
sends a frame to a port or statically by the user setting parameters.
Dependency on the "Base bridge mode"
The displayed columns depend on which "Base bridge mode" is set. If you change the "Base
bridge mode" the existing entries are lost.
Figure 5-2
Figure 5-3
Description
This table can contain the following columns:
● VLAN ID
Shows the VLAN-ID assigned to this MAC address.
● MAC Address
Shows the MAC address of the node that the device has learned or the user has
configured.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Base bridge mode: 802.1D transparent bridge
Base bridge mode: 802.1Q VLAN Bridge
Configuring with Web Based Management
5.3 The "Information" menu
71