Lldp - Siemens SCALANCE XB-200 Configuration Manual

Configuring with Web Based Management
5.3 The "Information" menu
5.3.11

LLDP

Status of the neighborhood table
This page shows the current content of the neighborhood table. This table stores the
information that the LLDP agent has received from connected devices.
You set the interfaces via which the LLDP agent receives or sends information in the
following section: "Layer 2 > LLDP".
Figure 5-4 Information LLDP
Description of the displayed values
This table contains the following columns:
● System Name
System name of the connected device.
● Device ID
Device ID of the connected device. The device ID corresponds to the device name
assigned via PST (STEP 7). If no device name is assigned, the MAC address of the
device is displayed.
● Local Interface
Port at which the IE switch received the information.
● Hold Time
An entry remains stored on the device for the time specified here. If the IE switch does
not receive any new information from the connected device during this time, the entry is
deleted.
74
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04