Displaying Tracked Objects - Dell C9000 Series Networking Configuration Manual

OBJECT TRACKING mode
delay {[up seconds] [down seconds]}
Valid delay times are from 0 to 180 seconds.
The default is 0.
3 (Optional) Identify the tracked object with a text description.
OBJECT TRACKING mode
description text
The text string can be up to 80 characters.
4 (Optional) Display the tracking configuration and the tracked object's status.
EXEC Privilege mode
show track object-id
Examples of Configuring Object Tracking for an IPv4 or IPv6 Interface
Example of configuring object tracking for an IPv4 interface.
Dell(conf)#track 101 interface tengigabitethernet 7/2/1 ip routing
Dell(conf-track-101)#delay up 20
Dell(conf-track-101)#description NYC metro
Dell(conf-track-101)#end
Dell#show track 101
Track 101
Interface TenGigabitEthernet 7/2/1 ip routing
Description: NYC metro
Example of configuring object tracking for an IPv6 interface.
Dell(conf)#track 103 interface tengigabitethernet 7/11/1 ipv6
routing
Dell(conf-track-103)#description Austin access point
Dell(conf-track-103)#end
Dell#show track 103
Track 103
Interface TenGigabitEthernet 7/11/1 ipv6 routing
Description: Austin access point

Displaying Tracked Objects

To display the currently configured objects used to track Layer 2 and Layer 3 interfaces, and IPv4 and IPv6
routes, use the following show commands.
To display the configuration and status of currently tracked Layer 2 or Layer 3 interfaces, IPv4 or IPv6 routes,
or a VRF instance, use the show track command. You can also display the currently configured per-
protocol resolution values used to scale route metrics when tracking metric thresholds.
• Display the configuration and status of currently tracked Layer 2 or Layer 3 interfaces, IPv4 or IPv6 routes,
and a VRF instance.
Object Tracking 738