Internet Group Management
Internet group management protocol (IGMP) is a Layer 3 multicast protocol that hosts use to join or leave a
multicast group.
Multicast is premised on identifying many hosts by a single destination IP address; hosts represented by the
same IP address are a multicast group. Multicast routing protocols (such as protocol-independent multicast
[PIM]) use the information in IGMP messages to discover which groups are active and to populate the
multicast routing table.
IGMP Implementation Information
•
The Dell Networking OS supports IGMP versions 1, 2, and 3 based on RFCs 1112, 2236, and 3376,
respectively.
•
The system does not support IGMP version 3 and versions 1 or 2 on the same subnet.
•
Dell Networking switches cannot serve as an IGMP host or an IGMP version 1 IGMP Querier.
•
The system automatically enables IGMP on interfaces on which you enable a multicast routing protocol.
Topics:
•
IGMP Protocol Overview
•
Configure IGMP
•
Viewing IGMP Enabled Interfaces
•
Selecting an IGMP Version
•
Viewing IGMP Groups
•
Enabling IGMP Immediate-Leave
•
IGMP Snooping
•
Fast Convergence after MSTP Topology Changes
•
Designating a Multicast Router Interface
Protocol (IGMP)
Internet Group Management Protocol (IGMP)
21
477