Dell C9000 Series Networking Configuration Manual page 251

Hide thumbs Also See for C9000 Series:

Table of Contents

The following illustration shows the configurations described on the following examples. These

configurations show how to create BGP areas using physical and virtual links. They include setting up the

interfaces and peers groups with each other.

Figure 25. Sample Configurations

Example of Enabling BGP (Router 1)

R1(conf)#int loop 0

R1(conf-if-lo-0)#ip address 192.168.128.1/24

R1(conf-if-lo-0)#no shutdown

R1(conf-if-lo-0)#show config

interface Loopback 0

ip address 192.168.128.1/24

R1(conf-if-lo-0)#int tengig 1/21

R1(conf-if-te-1/21)#ip address 10.0.1.21/24

R1(conf-if-te-1/21)#no shutdown

R1(conf-if-te-1/21)#show config

interface TenGigabitEthernet 1/21

ip address 10.0.1.21/24

R1(conf-if-te-1/21)#int tengig 1/31

Border Gateway Protocol IPv4 (BGPv4)

Troubleshooting