Table of Contents
Advertisement
•
Display Hardware Buffer Configurations, Counters.
show hardware {linecard <0-11> | pe <1-255> stack-unit <0-7>} buffer unit <0-0> port buffer-info
•
Display the modular packet buffers details per unit and the mode of allocation.
show hardware linecard slot—id buffer unit unit-number} total-buffer
•
Display the forwarding plane statistics containing the packet buffer usage per port per line card.
show hardware linecard slot—id buffer unit unit-number port {port-number | all}
buffer-info
•
Display the forwarding plane statistics containing the packet buffer statistics per CoS per port.
show hardware linecard slot—id buffer unit unit-number port {port-number} queue
{queue—num | all} buffer-info
•
Display input and output statistics on the party bus, which carries inter-process communication traffic
between CPUs.
show hardware party-bus {port { slot—id} | all} statistics
•
Display the ingress and egress internal packet-drop counters, MAC drop counters, and FP packet drops for
the line card on a per port basis.
show hardware linecard slot—id drops unit unit-number port {port-number}
Use the command output to troubleshoot a line card and port-pipe unit that may experience internal
drops.
•
Display the input and output statistics for a stack-port interface.
show hardware linecard slot—id unit unit-number
•
Display the counters in the field processors of a port-pipe unit on a line card.
show hardware linecard slot—id unit unit-number counters
•
Display the details of the FP devices, and HiGig ports on a port-pipe unit on a line card.
show hardware linecard slot—id unit unit-number details
•
Execute a specified bShell command from the CLI without going into the bShell.
show hardware linecard slot—id unit unit-number execute-shell-cmd {command}
•
Display the Multicast IPMC replication table from the bShell.
show hardware unit unit-number ipmc-replication
•
Display the internal statistics for each port-pipe (unit) on per port basis.
show hardware linecard slot—id unit unit-number port-stats [detail]
•
Display the line-card internal registers for each port-pipe.
show hardware linecard slot—id unit unit-number register
•
Display the tables from the bShell through the CLI without going into the bShell.
show hardware linecard slot—id unit unit-number table-dump {table-name}
•
Display hardware statistics from the specified port extender and stack-unit. number {buffer | cpu | drops|
unit}
show hardware pe pe-id stack-unit unit number {buffer | cpu | drops| unit}
•
Display the system flow entries on specified port extender and the stack unit in a PE stack. The command
output also displays flow entries on port-set when there are multiple port pipes.
show hardware system-flow pe {PEID stack-unit unit number port-set port-pipe-id counters | <cr>}
•
Display FP entries created for layer3 for the PE interface(s) to which the egress ACLs configurations are
applied.
show hardware ip eg-acl pe pe-id stack-unit unit—number port-set number
{ counters | <cr> }
•
Display FP entries created for layer3 for the PE interface(s) to which the ingress ACL configurations are
applied.
Debugging and Diagnostics
373
Advertisement
Table of Contents
Troubleshooting
