Configuring A Vlt Vlan Or Lag In A Pvlan - Dell C9000 Series Networking Configuration Manual

VLT LAG Mode
Peer1 Peer2
Promiscuou Promiscuou
s s
Promiscuou Trunk
s
Promiscuou Trunk
s
Access Access
Access Access
Access Access
Access Access
Promiscuou Access
s
Trunk Access
Configuring a VLT VLAN or LAG in a
PVLAN
You can configure the VLT peers or nodes in a private VLAN (PVLAN). Because the VLT LAG interfaces are
terminated on two different nodes, PVLAN configuration of VLT VLANs and VLT LAGs are symmetrical and
identical on both the VLT peers. PVLANs provide Layer 2 isolation between ports within the same VLAN. A
PVLAN partitions a traditional VLAN into subdomains identified by a primary and secondary VLAN pair. With
VLT being a Layer 2 redundancy feature, support for configuration of VLT nodes in a PVLAN enables Layer 2
PVLAN Mode of VLT VLAN
Peer1 Peer2
Primary Primary
- Secondary - Secondary
(Community) (Community)
- Secondary - Secondary
(Isolated) (Isolated)
Primary Normal
Primary Primary
Secondary Secondary
(Community) (Community)
- Primary VLAN X - Primary VLAN X
Secondary (Isolated) Secondary (Isolated) Yes
- Primary VLAN X - Primary VLAN X
Secondary (Isolated) Secondary (Isolated) No
- Primary VLAN X - Primary VLAN Y
Secondary Secondary
(Community) (Community)
- Primary VLAN Y - Primary VLAN X
Primary Secondary
Primary/Normal Secondary
ICL VLAN Mac
Membership Synchronization
Yes Yes
Yes Yes
Yes Yes
No No
Yes No
Yes Yes
Yes Yes
Yes
Yes Yes
No
No No
No No
No No
No No
No No
Virtual Link Trunking (VLT) 1208