Marking Egress Packets With A Dei Value - Dell C9000 Series Networking Configuration Manual

Dell#show interface dei-honor
Default Drop precedence: Green
Interface CFI/DEI
---------------------------------------
Te 0/1 0
Te 0/1 1
Te 1/9 1
Te 1/40 0

Marking Egress Packets with a DEI Value

On egress, you can set the DEI value according to a different mapping than ingress.
For ingress information, refer to
To mark egress packets, use the following command.
• Set the DEI value on egress according to the color currently assigned to the packet.
INTERFACE mode
dei mark {green | yellow} {0 | 1}
Example of Viewing DEI-Marking Configuration
To display the DEI-marking configuration, use the show interface dei-mark [interface slot/port
| linecard number port-set number] in EXEC Privilege mode.
Dell#show interface dei-mark
Default CFI/DEI Marking: 0
Interface Drop precedence CFI/DEI
--------------------------------
Te 0/1 Green
Te 0/1 Yellow
Te 1/9 Yellow
Te 1/40 Yellow
Drop precedence
Green
Yellow
Red
Yellow
Honoring the Incoming DEI
0
1
0
0
Value.
Service Provider Bridging 1024