Table of Contents
Advertisement
less effective as traffic increases because preemptive load balancing requires prior knowledge of traffic
distributions.
•
lack of scalable register decasulation: With only a single RP per group, all joins are sent to that RP
regardless of the topological distance between the RP, sources, and receivers, and data is transmitted to
the RP until the SPT switch threshold is reached.
•
slow convergence when an active RP fails: When you configure multiple RPs, there can be considerable
convergence delay involved in switching to the backup RP.
Anycast RP relieves these limitations by allowing multiple RPs per group, which can be distributed in a
topologically significant manner according to the locations of the sources and receivers.
1
All the RPs serving a given group are configured with an identical anycast address.
2
Sources then register with the topologically closest RP.
3
RPs use MSDP to peer with each other using a unique address.
Figure 91. MSDP with Anycast RP
Multicast Source Discovery Protocol (MSDP)
694
Advertisement
Table of Contents
Troubleshooting
