Configuring Supportassist Company - Dell C9000 Series Networking Configuration Manual

[no] enable
Dell(conf-supportassist-act-full-transfer)#enable
Dell(conf-supportassist-act-full-transfer)#

Configuring SupportAssist Company

SupportAssist Company mode allows you to configure name, address and territory information of the
company. SupportAssist Company configurations are optional for the SupportAssist service.
To configure SupportAssist company, use the following commands.
1 Configure the contact information for the company.
SUPPORTASSIST mode
[no] contact-company name {company-name}[company-next-name] ... [company-next-
name]
Dell(conf-supportassist)#contact-company name test
Dell(conf-supportassist-cmpy-test)#
2 Configure the address information for the company.
SUPPORTASSIST COMPANY mode
[no] address [city company-city] [{province | region | state} name] [country
company-country] [{postalcode | zipcode] company-code]
Dell(conf-supportassist-cmpy-test)#address city MyCity state MyState country
MyCountry
Dell(conf-supportassist-cmpy-test)#
3 Configure the street address information for the company.
SUPPORTASSIST COMPANY mode
[no] street-address {address1}[address2]...[address8]
Dell(conf-supportassist-cmpy-test)#street-address 123 Main Street
Dell(conf-supportassist-cmpy-test)#
4 Configure the territory and set the coverage for the company site.
SUPPORTASSIST COMPANY mode
[no] territory company-territory
Dell(conf-supportassist-cmpy-test)#territory IN
Dell(conf-supportassist-cmpy-test)#
SupportAssist 1097