Resetting A Port Extender - Dell C9000 Series Networking Configuration Manual

0 error
Dell#show pe 10 statistics
PE-ID: 10
PE-CSP Tx Message: 4
PE-CSP Rx Message: 2
ECP Tx: 5
ECP Rx Ack: 5
ECP Dropped: 0
ECP Rx: 3
ECP Tx Ack: 3
ell#show pe 10 system brief
Stack MAC
-- Stack Info --
Unit UnitType
-----------------------------------------------------------------------------------
-
0 Management
1 Member
2 Standby
3 Member
4 Member
5 Member
6 Member
7 Member
-- Power Supplies
Unit Bay Status
-------------------------------------------------------------------------
0 0 up
0 1 absent
-- Fan Status --
Unit Bay TrayStatus
-----------------------------------------------------------------------------------
-
0 0 up
Speed in RPM
For more information about verifying the PE configuration, see

Resetting a Port Extender

To reload a PE, enter the reset command.
•
reset pe pe-id stack-unit pe-stack-unit-id
EXEC Privilege
• pe-id is a port-extender ID number from 0 to 255.
• pe-stack-unit-id is a PE stack-unit ID number from 0 to 7.
Dell# reset pe 0 stack-unit 1
SVM C1048P
: a0:68:00:3f:92:bc
Status ReqTyp
online C1048P
not present
not present C1048P
not present C1048P
not present
not present
not present
not present
--
Type FanStatus
AC NA
NA
Fan0 Speed
up 8888
00:00:00:00:00:00
CurTyp
C1048P
FanSpeed(rpm)
NA
NA
Fan1 Speed
up 9056
Displaying PE Stack
52
Version Ports
9-9(0-5) 52
Information.
Port Extenders (PEs) 827