Dell C9000 Series Networking Configuration Manual page 360

Iteration 50 - File System Check passed
Completed 50 iterations
No issues found in SD Flash (/dev/wd0k)
SD Flash File System Stress Test is Passed
ssdFlashFileSystemStressTest ................................ PASS
Starting test: udfLinkStatusTest ......
Link Status for Port: 18 -> Peer Slot0 on unit: 0 is <DOWN>
Link Status for Port: 25 -> Peer Slot1 on unit: 0 is <DOWN>
Link Status for Port: 14 -> Peer Slot2 on unit: 0 is <DOWN>
Link Status for Port: 28 -> Peer Slot3 on unit: 0 is <DOWN>
Link Status for Port: 10 -> Peer Slot6 on unit: 0 is <DOWN>
Link Status for Port: 27 -> Peer Slot7 on unit: 0 is <DOWN>
Link Status for Port: 2 -> Peer Slot8 on unit: 0 is <DOWN>
Link Status for Port: 29 -> Peer Slot9 on unit: 0 is <DOWN>
Link Status for Port: 6 -> Peer pRPM on unit: 0 is <DOWN>
udfLinkStatusTest ........................................... FAIL
Starting test: usbTest ......
-USB "/dev/rsd0d" is not plugged/mounted/formatted; test SKIPPED
usbTest ..................................................... FAIL
ipcPingTrafficTest .......................................... FAIL
--------- Group Test Statistics ---------
Cpu Name : CP00
Total : 48
Passed : 31
Failed : 17
Aborted : 0
Elapsed time : 00H:03M:53S
Stop reason : after completion
------ Failed tests (level, times) ------
cpuGELinkStatusTest (0, 1)
psuCurrentTest (0, 1)
psuFanAirFlowDirectionTest (0, 1)
psuFanSpeedTest (0, 1)
psuFanStatusTest (0, 1)
psuPresenceTest (0, 1)
psuShowTempTest (0, 1)
psuStatusTest (0, 1)
psuVoltageTest (0, 1)
fanCntrlSpeedTest (1, 1)
psuEepromAccessTest (1, 1)
udfLinkStatusTest (1, 1)
ipcPingTrafficTest (2, 1)
.
The following example shows the show diag linecard detail command.
ell#show diag linecard 4 detail
Diag status of linecard member 4:
--------------------------------------------------------------------------
Board: C9010 Dell Networking
=================================================
LEVEL 2 DIAGNOSTIC
i2cTest (0, 1)
usbTest (0, 1)
i2cTest (1, 1)
usbTest (1, 1)
Debugging and Diagnostics 360