Dell C9000 Series Networking Configuration Manual page 938

Hide thumbs Also See for C9000 Series:

Table of Contents

fpEgrQBuffSnapshotTable: Retrieves BST statistics from the egress port used in a buffer. This table

displays a snapshot of the buffer cells used by unicast and multicast data and control queues.

fpIngPgBuffSnapshotTable: Retrieves BST statistics from the ingress port for the shared and headroom

cells used in a priority group. The snapshot of the ingress shared cells and the ingress headroom cells

used for each priority group are displayed in this table when PFC is enabled. This table is indexed by

stack-unit index, port number and priority-group number.

fpStatsPerPgTable: Retrieves information on the allocated Min cells, shared cells, and headroom cells for

each priority group, the mode in which the buffer cells are allocated (static or dynamic), and the used

Min cells, shared cells, and headroom cells for each priority group. The table returns a value of 0 if the

allocation mode is static and a value of 1 if the allocation mode is dynamic. This table is indexed by

stack-unit number, port number and priority-group number.

Quality of Service (QoS)

Troubleshooting