ip route-import
ip route-import
Show routing tables of all the VRFs (without any route-export and route-import tags being configured)
Show routing tables of VRFs( after route-export and route-import tags are configured).
Important Points to Remember
•
If the target VRF conatins the same prefix as either the sourced or Leaked route from some other VRF,
then route Leaking for that particular prefix fails and the following error-log is thrown.
SYSLOG ("Duplicate prefix found %s in the target VRF %d", address,
import_vrf_id) with
•
The source routes always take precedence over leaked routes. The leaked routes are deleted as soon as
routes are locally learnt by the VRF using other means.
•
For recovery, you must take appropriate action either by deleting the unwanted prefixes or issuing clear
command or both.
•
In the target VRF, you cannot leak routes that are imported through the route leaking feature.
•
The leaked route points to the next-hop of the source routes. You cannot do any modifications to the
next-hop of the leaked route in the destination VRF.
•
IPv6 link local routes will never be leaked from one VRF to another.
2:2
3:3
The type/level is EVT_LOGWARNING.
Virtual Routing and Forwarding (VRF)
1164