Configuring a Custom-defined Period for NTP
time Synchronization
You can configure the system to send an audit log message to a syslog server if the time difference from the
NTP server is greater than a threshold value (offset-threshold). However, time synchronization still occurs. To
configure the offset-threshold, follow this procedure.
•
Specify the threshold time interval before which the system generates an NTP audit log message if the
system time deviates from the NTP server.
CONFIGURATION mode
ntp offset-threshold threshold-value
The range for threshold-value is from 0 to 999.
Dell(conf)#ntp offset-threshold 9
System Time and Date
1114