Dell C9000 Series Networking Configuration Manual page 687

Hide thumbs Also See for C9000 Series:

Table of Contents

In Scenario 4, RP1 has a default peer plus an access list. The list permits RP4 so the RPF check is

disregarded for active sources from it, but RP5 (and all others because of the implicit deny all) are

subject to the RPF check and fail, so those active sources are rejected.

Figure 87. MSDP Default Peer, Scenario 1

Figure 88. MSDP Default Peer, Scenario 2

Multicast Source Discovery Protocol (MSDP)

Troubleshooting