Topics:
•
Configure GVRP
•
Enabling GVRP Globally
•
Enabling GVRP on a Layer 2 Interface
•
Configure GVRP Registration
•
Configure a GARP Timer
Configure GVRP
To begin, enable GVRP.
To facilitate GVRP communications, enable GVRP globally on each switch. GVRP configuration is per
interface on a switch-by-switch basis. Enable GVRP on each port that connects to a switch where you want
GVRP information exchanged. In the following example, GVRP is configured on VLAN trunk ports.
Figure 41. Global GVRP Configuration Example
GARP VLAN Registration Protocol (GVRP)
464