Sample Configurations For Ospfv2; Basic Ospfv2 Router Topology; Ospf Area 0 - Te 1/1 And 1/2 - Dell C9000 Series Networking Configuration Manual

Sample Configurations for OSPFv2

The following configurations are examples for enabling OSPFv2.
These examples are not comprehensive directions. They are intended to give you some guidance with typical
configurations.
You can copy and paste from these examples to your CLI. To support your own IP addresses, interfaces,
names, and so on, be sure that you make the necessary changes.

Basic OSPFv2 Router Topology

The following illustration is a sample basic OSPFv2 topology.
Figure 100. Basic Topology and CLI Commands for OSPFv2
OSPF Area 0 — Te 1/1 and 1/2
router ospf 11111
network 10.0.11.0/24 area 0
network 10.0.12.0/24 area 0
network 192.168.100.0/24 area 0
!
interface TengigabitEthernet 1/1
ip address 10.1.11.1/24
no shutdown
!
interface TengigabitEthernet 1/2
ip address 10.2.12.2/24
Open Shortest Path First (OSPFv2 and OSPFv3) 766