Dell C9000 Series Networking Configuration Manual page 716

no ip address
tagged TenGigabitEthernet 3/11,21
no shutdown
!
interface Vlan 200
no ip address
tagged TenGigabitEthernet 3/11,21
no shutdown
!
interface Vlan 300
no ip address
tagged TenGigabitEthernet 3/11,21
no shutdown
Example Running-Configuration
This example uses the following steps:
1 Enable MSTP globally and set the region name and revision map MSTP instances to the VLANs.
2 Assign Layer-2 interfaces to the MSTP topology.
3 Create VLANs mapped to MSTP instances tag interfaces to the VLANs.
(Step 1)
spanning-tree
spanning-tree configuration name Tahiti
spanning-tree configuration revision 123
spanning-tree MSTi instance 1
spanning-tree MSTi vlan 1 100
spanning-tree MSTi instance 2
spanning-tree MSTi vlan 2 200
spanning-tree MSTi vlan 2 300
(Step 2)
interface 1/0/31
no shutdown
spanning-tree port mode enable
switchport protected 0
exit
interface 1/0/32
no shutdown
spanning-tree port mode enable
switchport protected 0
exit
(Step 3)
interface vlan 100
tagged 1/0/31
tagged 1/0/32
exit
interface vlan 200
tagged 1/0/31
tagged 1/0/32
exit
interface vlan 300
tagged 1/0/31
Multiple Spanning Tree Protocol (MSTP) 716