Dell C9000 Series Networking Configuration Manual page 1197

• Display the current status of a port or port-channel interface used in the VLT domain.
EXEC mode
show interfaces interface
• interface: specify one of the following interface types:
• Fast Ethernet: enter fastethernet slot/port.
• 1-Gigabit Ethernet: enter gigabitethernet slot/port.
• 10-Gigabit Ethernet: enter tengigabitethernet slot/port.
• Port channel: enter port-channel {1-128}.
Examples of the show vlt and show spanning-tree rstp Commands
The following example shows the show vlt backup-link command.
Dell_VLTpeer1# show vlt backup-link
VLT Backup Link
-----------------
Destination:
Peer HeartBeat status:
HeartBeat Timer Interval:
HeartBeat Timeout:
UDP Port:
HeartBeat Messages Sent:
HeartBeat Messages Received: 1025
Dell_VLTpeer2# show vlt backup-link
VLT Backup Link
-----------------
Destination:
Peer HeartBeat status:
HeartBeat Timer Interval:
HeartBeat Timeout:
UDP Port:
HeartBeat Messages Sent:
HeartBeat Messages Received: 1014
The following example shows the show vlt brief command.
Dell_VLTpeer1# show vlt brief
VLT Domain Brief
------------------
Domain ID:
Role:
Role Priority:
ICL Link Status:
HeartBeat Status:
VLT Peer Status:
Local Unit Id:
Version:
Local System MAC address:
Remote System MAC address:
Configured System MAC address: 00:0a:0a:01:01:0a
Remote system version:
Delay-Restore timer:
Dell_VLTpeer2# show vlt brief
VLT Domain Brief
------------------
Domain ID:
10.11.200.18
Up
1
3
34998
1026
10.11.200.20
Up
1
3
34998
1030
1000
Secondary
32768
Up
Up
Up
0
5(1)
00:01:e8:8a:e9:70
00:01:e8:8a:e7:e7
5(1)
90 seconds
1000
Virtual Link Trunking (VLT) 1197