Dscp Color Maps - Dell C9000 Series Networking Configuration Manual

policy-map-output
2 After you create an output policy map, do one or more of the following:
Applying an Output QoS Policy to a Queue
Specifying an Aggregate QoS Policy
Applying an Output Policy Map to an Interface
3 Apply the policy map to an interface.
Applying an Output QoS Policy to a Queue
To apply an output QoS policy to a queue, use the following command.
• Apply an output QoS policy to queues.
INTERFACE mode
service-queue
Specifying an Aggregate QoS Policy
To specify an aggregate QoS policy, use the following command.
• Specify an aggregate QoS policy.
POLICY-MAP-OUT mode
policy-aggregate
Applying an Output Policy Map to an Interface
To apply an output policy map to an interface, use the following command.
• Apply an input policy map to an interface.
INTERFACE mode
service-policy output
You can apply the same policy map to multiple interfaces, and you can modify a policy map after you
apply it.

DSCP Color Maps

This section describes how to configure color maps and how to display the color map and color map
configuration.
This sections consists of the following topics:
• Creating a DSCP Color Map
• Displaying Color Maps
• Display Color Map Configuration
Quality of Service (QoS) 922