First Use; Connecting Components Before The First Use; Start; Configuration - Hirschmann OWL LTE M12 User Manual

4

First Use

4.1 Connecting Components before the First
Use
Before putting the router into operation, it is necessary to connect the
components which are required for your applications. Do not forget to insert
at least 1 SIM card.
Note: The router can not operate without connecting the main antenna, at
least 1 SIM card and a power supply. If the antenna is not connected, the
router can be damaged.
4.2

Start

The router operates when the power supply is connected to the router. By
default, the router automatically starts to log in to the default APN. You can
change the parameters of the router behavior using the web interface. You
can find a detailed description of the parameters in the User Manual

Configuration.

4.3 Configuration
Note: Before you apply power to the router, insert at least 1 SIM card in the
router, and install the main antenna. Activate the SIM card in the
"Administration> Unlock SIM card" dialog, after inserting it into the SIM card
reader.
4.3.1

Configuration using a Web Browser

Status monitoring, configuration and administration of the router is available
using the graphical user interface (GUI) which can be accessed by entering
the IP address of the router into your web browser. The default IP address of
the router is 192.168.1.1 netmask 255.255.255.0 on ETH0. The default
settings allow only the user admin with the default password private to
configure the router.
26
Installation OWL LTE M12
Release 04 06/2017