Table of Contents
Advertisement
5 Connecting to the OWL-IPG-AMERICAS
The OWL-IP-AMERICAS configuration webpage is used to configure and manage the OWL-
IPG-AMERICAS. First-time setup must be performed over a wired network, where provider-spe-
cific cellular configuration details are configured. Once initially set up, you can access the web-
server over the LAN and cellular networks (unless LAN access is disabled).
Key benefits of the web-based configurator include:
Login and device parameter configuration
l
Network setting adjustments
l
Security setting maintenance
l
Event reporting update
l
Firmware installs
l
5.1
Configuration Webpage Setup
1. Insert the SIM card (size 2FF, Mini-SIM) on the front of the module.
2. Ensure that the module is connected to the network.
3. Apply power to the module (10 to 30 VDC).
4. Open a web browser and enter the OWL-IPG-AMERICAS default address of
http://192.168.0.250:8080.
5. If your PC is on a different subnet, temporarily set the IP address of your PC to
192.168.0.xxx with a subnet of 255.255.255.0.
6. Once the OWL-IPG-AMERICAS homepage opens, enter the default credentials to log in:
USER: admin
PASSWORD: private
Be sure to customize your password once you log in. You can do this by navigating to
Administrator > Access Control > Web Login.
Note: After a factory reset, the User and Password fields will revert back to their defaults.
21
Installation OWL IPG
Release 01, 01/2020
Advertisement
Table of Contents
