Basic Settings
Figure 5: Device status and alarm display
System data
This area of the website displays the system parameters of the device.
Here you can change,
– the system name,
– the location description,
– the name of the contact person for this device,
– the availability of the media modules
– the temperature threshold values.
Name
Name
Location
Contact person
Basic module
Media module 1
Media module 2
Media module 3
Media module 4
Media module 5
Media module 6
Media module 7
Power supply (P1/P2)
Operating time
Temperature
Table 1: System data
RM Web L3P
Release 4.1 03/08
Time of the oldest existing alarm
Cause of the oldest existing alarm
Symbol indicates the Device Status
Meaning
System name of this device
Location of this device
Contact person for this device
Hardware version of the basic module
Hardware version of media module 1
Hardware version of media module 2
Hardware version of media module 3
Hardware version of media module 4
Hardware version of media module5
Hardware version of media module 6
Hardware version of media module 7
Status of the power supply units
Time that has elapsed since the device was last restarted.
Temperature in the device. Lower/upper temperature thresh-
old values. If the temperature goes outside this range, the
device generates an alarm message.
(see fig. 6)
and
2.1 System
19