YASKAWA L1000A Quick Start Manual page 55

Switches and Jumpers on the Terminal Board
■
The terminal board is equipped with several switches used to adapt the drive I/Os to the external control signals.
Figure 28 shows the location of these switches. Refer to
Figure 28
YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
Jumper S3
Terminal H1/H2
Sink/Source Sel.
DIP Switch S2
RS-422/485 Termination
Resistor
Off On
Figure 28 Locations of Jumpers and Switches on the Terminal Board
Control I/O Configuration on page 54
3 Electrical Installation
for setting instructions.
YEA_c
ommon
53
3