3 Electrical Installation
Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200
1.
Remove the terminal cover and the digital operator.
2.
Loosen the installation screw on the front cover.
3.
Use a straight-edge screwdriver to loosen the hooks on each side of the cover that hold it in place.
Figure 17
Front cover
installation screw
(Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200)
4.
Unhook the left side of the front cover then swing the left side towards you as shown in
comes off.
Figure 18
(Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200)
Reattaching the Front Cover
Models CIMR-LU20008 to 20075, 40005 to 40039, and 50003 to 50027
Reverse the instructions given in
and 5
0003 to 5
0027) on page 31
front cover while guiding it back into the drive. Make sure it clicks firmly into place.
32
Hook
Figure 17 Remove the Front Cover
Figure 18 Remove the Front Cover
Remove the Front Cover (Models CIMR-LU2
to reattach the front cover. Pinch inwards on the hooks found on each side of the
Hook
Free hooks on both
sides of the cover
YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
Figure 18
0008 to 2
0075, 4
0005 to 4
until the cover
0039,