YASKAWA L1000A Quick Start Manual page 127

4.
Connect the cable to the CN19 connector port on the drive.
Note: The connector port location and angle vary by drive model.
NOTICE: Be sure that the connector fastens at the correct angle to the CN19 connector port. The incorrect angle could damage the
battery, cable, or connector.
Figure 60
5.
The cable should pass through the connector cover with the cover fastened to the drive.
Figure 61
6.
Slide the CN19 connector cover back into place as shown in
NOTICE: Make sure the cable does not get pinched between the drive and the CN19 connector cover, as this could damage the cable.
Figure 62
YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
Figure 67 Connecting the Cable
Figure 68 Reattaching the CN19 Connector Cover
Downward
Figure 69 Sliding the CN19 Connector Cover into Place
4 Start-Up Programming & Operation
Port CN19
Battery cable
Figure 69.
Leftward
4
125