YASKAWA L1000A Quick Start Manual page 125

3.
Use a pair of diagonal cutters to cut an opening in the connector cover that allows the cable to pass through. The
cable should pass through the connector cover with the cover fastened to the drive.
Figure 54
4.
Slide the connector cover back into place as shown in
NOTICE: Make sure the cable does not get pinched between the drive and the connector cover, as this could damage the cable.
Figure 55
Figure 56
YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
Cut an opening to allow the
battery cable to pass through.
Figure 61 Reattaching the Connector Cover (1)
Figure 62 Reattaching the Connector Cover (2)
Connect
to battery.
Figure 63 Drive and Battery Connection Complete
4 Start-Up Programming & Operation
Figure 62.
4
123