Dexcom g4 platinum Quick Start Manual page 82

ANIMAS® VIBE™ SYSTEM
C H AP TE R 9 - AD V AN C ED F EA TU R E S / SE TU P A N D A CT IV AT I ON
Setup Advanced Screen 6 – Low Cartridge Warning Setting and
Occlusion Sensitivity Setting
You can program your pump to alert you when your insulin cartridge is running low. The occlusion
detection is automatic. A blockage may restrict the flow of insulin into your body.
This screen allows you to:
• Set your low cartridge warning to alert you at 10, 20, 30, 40 or 50 units remaining in the cartridge
• You can set your pump to detect a blockage with high sensitivity (H) or low sensitivity (L). The
sensitivity level refers to how quickly the pump will sense back pressure from an occlusion in the
infusion line, with H meaning "more sensitive" and L meaning "less sensitive". Review the Occlusion
Sensitivity setting with your HCP and see Chapter 17 in Section I for more information.
1.
From the SETUP ADV 6 screen, scroll to the desired field.
2.
Press to change to flashing cursor for Edit mode.
3.
Use the /
4.
Press when setting is made.
5.
Scroll to "
or " " to go to other Advanced Setup screens, or "Home" to go to the Home
screen.
6.
Press .
The Low Cartridge Warning only alerts you one time for each cartridge. For
example, if you have it set to 30U and receive an alert, and then change the
setting to 20U, it will not alert at 20U until after the next cartridge has been
primed.
If a bolus is delivered which causes a Low Cartridge Warning, the amount of
remaining insulin may be lower than the Low Cartridge Warning threshold.
See Chapter 11 in Section I for more information about the Warning.
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 56
buttons to change to desired setting.
", " ", or "Home" at the bottom of the screen. Select " "
56
Dec 2014
SETUP ADV 6
Low Cartridge
Warning
20U
Occlusion
Sensitivity L
Home
Warning
Low
cartridge.
10U or
less left.
Confirm
A164 of A312
11/14/14 2:52 PM