Dexcom g4 platinum Quick Start Manual page 40

ANIMAS® VIBE™ SYSTEM
C H AP TE R 3 - GE T TI N G Y O U R PU M P R EA D Y
NOTE:
• The correct battery type must be selected in order for your battery life indicator to be accurate.
"Lith" = Lithium, "Alkl" = Alkaline.
• It is important to have the correct (current) date and time set in your pump. If the pump loses the
date and time setting due to the battery being removed for an extended period, you will not be
able to go to the Home Screen until you edit and confirm the settings on the Verify Screen.
11.
Scroll to "Confirm" and press
NOTE: Until you have programmed a basal rate, the Alert screen shown here will appear when your
pump is awakened. Simply scroll to "Confirm" and press
12.
Each time you change the battery, a full Prime/Rewind sequence is required (see Priming your
Pump and Infusion Set in this chapter). Disconnect the pump from your infusion set prior to starting
the Prime/Rewind sequence and when priming.
Setup
Setting/Changing the Time and Date
When you change your battery, the VERIFY screen allows you to edit the time and date.
You can also access the Time/Date SETUP screen by selecting "Setup" from the MAIN MENU.
1.
From the Home screen,
press to select "Menu".
Scroll to "Setup" on the
MAIN MENU. Press
2.
Scroll to "Time/Date" on
the SETUP menu. Press
3.
Press the
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 14
. The Home screen is displayed.
2 : 27
.
Basal Rate
0.025U/Hr
. Insulin: 105U
Status
button to activate Edit mode (indicated by flashing cursor).
to move past this Alert screen.
MAIN MENU
PM
Bolus
CGM
Suspnd/Resum
History
Basal
Setup
Prime/Rewind
Menu
Status Home
14
Dec 2014
SETUP
Time/Date
Sound
Advanced
Home
A122 of A312
11/14/14 2:52 PM