Dexcom g4 platinum Quick Start Manual page 53

ANIMAS® VIBE™ SYSTEM
cHAPtER 5 - USING BASAl PROGRAm FEAtURES
You can program your pump to display either 1 or 4 basal program options. Basal insulin is delivered
continuously to help keep your BG in target between meals. Having more than one pre-set basal
program makes it easy for you to switch programs for weekends, weekdays, shift work, menstruation
and sick days. If you are new to pumping, your HCP may suggest you first become comfortable with
one program before programming multiple basal programs. Consult with your HCP about basal insulin
needs and what to do if you become ill.
NOTE: DO NOT try to set a basal delivery amount less than 0.025U/Hr. You cannot set a basal delivery
amount less than 0.025U/Hr. When you set a negative temporary basal rate, your pump will beep
and display an Alert screen to remind you of the minimum delivery limit. The screen will display once
for 4 seconds and give one audible alert (if you turn on Alert sounds in Setup). Your pump will not
deliver any temporary basal set below 0.025U/Hr. Any temporary basal rate set below 0.025U/Hr will
automatically be re-set to 0.025U/Hr.
Setting a Basal Program
Each basal program can be set with up to 12 different basal rates (doses) in a 24-hour period.
These 12 basal rates can be set to accommodate your changing basal needs throughout the day. For
example, your body may need more insulin in the early hours of sleeping to compensate for the "dawn
phenomenon." You can program time segments to begin at any hour or half hour.
NOTE: The /
mode. When in Edit mode, the
flashing, that means you can edit the entry. Use the
1.
From the MAIN MENU, select "Basal". Press
The BASAL MENU displays the following:
• Total basal insulin programmed for the 24-hour period
• Temp (if you wish to program a Temporary Basal rate)
• The active basal program, designated by number
and by name, as well as an "A" to indicate the
active program. (If you have activated multiple basal
programs in the Setup Advanced menu, all 4 basal
program options will be displayed as shown on the
far right.)
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 27
buttons will move the cursor through pump display entries (fields) when not in Edit
/ buttons will change the value of the entry (field). If the cursor is
button to start/stop Edit mode.
.
BASAL MENU
Total
0.00U
Temp
A1-WEEKDAY
Main Menu
27
Dec 2014
5
MAIN MENU
Bolus
CGM
Suspnd/Resum
History
Basal
Setup
Prime/Rewind
Status Home
BASAL MENU
Total
0.00U
Temp
A1-WEEKDAY
2-other
3-weekend
4-exercise
Main Menu
A135 of A312
11/14/14 2:52 PM