Chapter 5 - Using Basal Program Features - Dexcom g4 platinum Quick Start Manual

ANIMAS® VIBE™ SYSTEM
C H AP TE R 5 - US I N G B AS AL PR O GR AM F EA TU R ES
8.
Continue until basal segments have been set as recommended by your HCP.
9.
When finished, scroll to "Save/Review" and press
now resumed automatically. The BASAL OPTIONS screen is displayed and "Review" is highlighted.
Warning
Basal edit
not saved.
Basal
delivery
suspended.
Edit Basal
10.
Press to review your entries for accuracy. Your basal segment
settings are displayed, 5 per screen, depending on how many of the
possible segments you have programmed. If you have more than 5 segments
programmed, scroll to "Next" on the bottom of the first or second screen to
see the second and third screens as desired.
11.
When finished reviewing the basal segment screens, press
of the basal program review screens. The BASAL OPTIONS screen is displayed.
a.
If you have edited and saved/reviewed the active program, it is resumed
automatically. You can also select "Go" and the Home screen is displayed,
which shows the current rate of delivery for the program that is active.
b.
If you have edited an inactive program and wish to activate it, select "Go"
from the BASAL OPTIONS screen. When you select "Go", the Home screen is
displayed, which shows the current rate of delivery for the program that is
active.
Adding/Changing Segments in an Existing Basal Program
1.
From the BASAL MENU, select desired program and press
displayed and "Edit" is highlighted.
2.
Press to display the EDIT BASAL screen and begin editing basal segments.
3.
Scroll to highlight the field you wish to change or to next available blank line to add a segment.
Press to activate Edit mode. (The cursor will flash to indicate Edit mode.)
4.
Use / buttons to set Start times and U/Hr amounts.
5.
Check that the AM/PM settings are correct.
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 29
NOTE: If your screen display has timed out (gone to sleep) or if an Alarm/
Warning appears before you have selected "Save/Review" while editing, a
Warning screen will remind you the basal edit has not been saved and basal
delivery has been suspended. See Chapter 11 in Section I.
29
Dec 2014
. If you have edited the active program, it is
BASAL OPTIONS
A1-WEEKDAY
Total
Clear
Edit
Review
Go
Main Menu
with "Options" highlighted or any
BASAL OPTIONS
A1-WEEKDAY
Total
Clear
Edit
Review
Go
Main Menu
. The BASAL OPTIONS screen is
13.60U
13.60U
A137 of A312
11/14/14 2:52 PM