Dexcom g4 platinum Quick Start Manual page 153

ANIMAS® VIBE™ SYSTEM
C H AP TE R 2 - C GM S ET TI N G S
(Transmitter) Out Of Range Alert
The (Transmitter) Out of Range Alert will display/sound on your pump if your Transmitter is not within
RF range of your pump (12 feet (3.6 meters)).
CGM Setup
Sounds
High Alert
Low Alert
Rise Rate
Fall Rate
Out of Range
Transmitter
CGM Menu
Out of Range
Snooze Time
minutes
30
Enable
Yes
CGM Setup
3.
When you are finished, scroll to "CGM Setup" and press
NOTE: You can enable or disable (default is "Yes" – enable) the Out Of Range Alert. If this feature is
disabled, the Out Of Range Alert will not display/sound on the pump.
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 125
1.
From the CGM Setup screen, scroll to "Out of Range". Press
2.
With the "Snooze Time" field highlighted on the Out of Range screen,
press to activate the edit mode (flashing highlight). Use the
to select the desired snooze time for the alert and press
lets you set a time for the Out of Range alert to display/sound again on your
pump after you first confirm the alert, if the condition causing the original
alert has not been resolved. You may set a snooze time from 21 to 201
minutes (default value is 30 minutes) in 3 minute increments.
125
Dec 2014
.
/
. The snooze time
to return to the CGM Setup screen.
buttons
A235 of A312
11/14/14 2:53 PM