Dexcom g4 platinum Quick Start Manual page 150

ANIMAS® VIBE™ SYSTEM
C H AP TE R 2 - C GM S ET TI N G S
CGM Warning
Sounds
High Alert
Low Alert
Rise Rate
Fall Rate
Range
Other
CGM Setup
5.
Repeat step 4 for the remaining alerts (Low Alert, Rise Rate, Fall Rate, Out of Range, Other).
6.
When you are finished, scroll to "CGM Setup" and press
Setting CGM Alert Values/Limits
You can enable/disable alerts and set CGM values/limits for:
• High Alert
• Low Alert
• Rise Rate
• Fall Rate
You can also set a "snooze time" for the High and Low Alert limits and the (Transmitter) Out of Range
alert. See the pages that follow for more information on CGM Alerts.
NOTE:
• If you disable an Alert, it will not display/sound on the pump.
• You cannot disable the CGM Warning that displays/sounds when your most recent CGM reading is at
or below 55 mg/dL.
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 122
4.
The "High Alert" field will be highlighted on the CGM Warning Sounds
screen. Press so that the highlight is flashing. Use the
H
to select the desired sound for this alert. Press
H
H
Pump sounds may be set to:
H
H
• Vibrate (Vib) only
H
• Low Volume (L) beep and vibrate
• Medium Volume (M) beep and vibrate
• High Volume (H) beep and vibrate (default setting)
.
to return to the CGM Setup screen.
122
Dec 2014
and buttons
A232 of A312
11/14/14 2:53 PM