Dexcom g4 platinum Quick Start Manual page 42

ANIMAS® VIBE™ SYSTEM
C H AP TE R 3 - GE T TI N G Y O U R PU M P R EA D Y
Sounds – Setting/Changing
The sound menu only adjusts sounds for pump-related functions. It does not activate the feature.
For example, Audio Bolus Sound is adjusted in this menu, but to turn the Audio Bolus feature on, go
to the Setup Advanced menu. See Chapter 9 in Section I. If you are using the Dexcom G4 PLATINUM
Sensor and Transmitter with your pump, refer to Chapter 2 in Section II to set CGM-related sounds.
Your pump comes pre-loaded with a tune for most Alerts, Reminders and Alarms on medium and
high volume settings. This tune plays only for the initial audible notification. If you do not confirm the
initial notification, the next sound will be the factory default. If not confirmed, Warnings and Alarms
will automatically progress to high volume and vibrate within one hour. Refer to Chapter 11 in
Section I and Chapter 10 in Section II for a complete description of alarms, alerts and warnings.
For safety reasons, the Audio Bolus sound cannot be turned off.
Normal Bolus Sound – A single beep at the beginning and end of bolus delivery
Audio Bolus Sound – A single beep at the beginning and end of bolus delivery to confirm delivery of
an Audio Bolus. Refer to Chapter 10 in Section I for a description of Audio Bolus beeps. (OFF is not an
option for this sound setting).
Temp Basal Sound – A single beep once every 30 minutes to remind the user that a Temp basal is in
effect.
The options from the second Setup Sound menu are listed below. They can be set to one of the
following: Vibrate (Vib), Low volume (L), Medium volume (M), High volume (H) or can be shut off (OFF).
For safety reasons, the Reminder, Warning and Alarm sounds cannot be turned off.
NOTE: Some CGM warnings do not have sounds.
Reminder Sound – A single beep at the time of the Reminder. (OFF is not an option for this sound
setting).
Warning Sound – A tune will play when the Warning is displayed. (OFF is not an option for this sound
setting).
Alert Sound – A single beep when the Alert is displayed.
Alarm Sound – A tune will play when the Alarm is displayed. (OFF is not an option for this sound
setting).
m CAUTION: SET pump Alerts, Warnings and Alarms to high volume before going to sleep,
unless otherwise recommended by your HCP. This way you will have a better chance of waking up
if there is a situation that requires immediate action.
1.
From the MAIN MENU, scroll to "Setup". Press the
2.
Scroll to "Sound". Press the
3.
Use the /
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 16
button to go to the SETUP SOUND screen.
buttons to scroll to your selection. Press the
button.
button.
16
Dec 2014 A124 of A312
11/14/14 2:52 PM