Dexcom g4 platinum Quick Start Manual page 149

ANIMAS® VIBE™ SYSTEM
C H AP TE R 2 - C GM S ET TI N G S
Setting CGM Alerts on your Pump
You can set your pump to display and sound (beep/vibrate) an alert when:
• Your CGM readings are outside your target range.
• Your CGM readings may be rising or falling too quickly.
• Your Transmitter is not within RF range of your pump.
• There are other CGM problems that require your attention.
On a few CGM settings, you can also select a "snooze time." The snooze time tells your pump to
display/sound the alert again at a set amount of time after first confirming the alert, if the condition
causing the original alert has not been resolved. Consult with your HCP on the settings that are most
appropriate for you.
CGM settings affect how and when your pump displays/sounds an alert, and how information is
displayed on the CGM Data and CGM Trend screens.
NOTE: Your pump does not have the same "progressive" warnings and alarms safety system for CGM
functions as it does for insulin delivery functions.
MAIN MENU
Bolus
CGM
Suspnd/Resum
History
Basal
Setup
Prime/Rewind
Status
CGM Menu
BG Cal.
Trend Graph
Start/Stop
History
Setup
Main Menu
CGM Setup
Sounds
High Alert
Low Alert
Rise Rate
Fall Rate
Out of Range
Transmitter
CGM Menu
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 121
1.
From the MAIN MENU, scroll to "CGM" and press
Home
2.
Scroll to "Setup" and press
3.
Scroll to "Sounds" on the CGM Setup screen and press
You can set pump sounds for:
• High Alert
• Low Alert
• Rise Rate
.
• Fall Rate
• (Transmitter) Out of Range
• Other (alerts)
121
Dec 2014
.
.
A231 of A312
11/14/14 2:53 PM