Chapter 11 - Care And Maintenance Of Your Dexcom G4 Platinum Sensor And Transmitter - Dexcom g4 platinum Quick Start Manual

ANIMAS® VIBE™ SYSTEM
cHAPtER 11 - cARE AND mAINtENANcE OF YOUR
Care and Maintenance of your Dexcom G4 PLATINUM Sensor and Transmitter
Only use Dexcom-supplied parts (Dexcom G4 PLATINUM Sensors and Transmitters) with your Animas
Vibe System. DO NOT use Sensors and Transmitters from other companies.
™
Cleaning
Wipe the bottom of the transmitter with a damp cloth or isopropyl alcohol wipe. Place the transmitter
on a clean, dry cloth, and air dry for 2-3 minutes.
Cleaning the Transmitter
1.
Wipe the outside of the Transmitter with a wrung-out, slightly water-dampened cloth or isopropyl
alcohol wipe.
2.
The Transmitter is water resistant when snapped into the Sensor pod, but DO NOT soak the
Transmitter by itself in liquid.
3. DO NOT use soap, nail polish remover, or paint thinner. Only use isopropyl alcohol and water.
4.
DO NOT use wipes that contain adhesives (e.g., IV PREP) that could damage the Transmitter
5.
Place the Transmitter on a clean, dry cloth and air dry for 2-3 minutes.
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 173
DExcOm G4 PlAtINUm SENSOR AND tRANSmIttER
173
Dec 2014
11
®
A283 of A312
11/14/14 2:53 PM