Dexcom g4 platinum Quick Start Manual page 32

ANIMAS® VIBE™ SYSTEM
C H AP TE R 2 - I N TR O DU CT I ON T O Y OU R A N IM AS
Contrast Button/CGM Shortcut
Pressing the
your display. There are three contrast levels: Dim, Default and Bright. To preserve battery life, your
pump display will Auto-dim when no pump function button (any button other than the Contrast or
Audio Bolus buttons) has been pressed for half the period you set for the display to time out under
Advanced Features. While in Auto-dim mode, you can restore the default contrast level you have set
by pressing the
will restore the default contrast level as well as perform the function of the button. To adjust contrast
during a Call Service alarm, you must use the
If you are not using the Dexcom G4 PLATINUM Sensor and Transmitter with your pump, CGM functions
and data will not be operational on your pump display. However, pressing the
pump is in sleep mode will awaken the pump to one of the CGM Trend graphs or the CGM Data screen,
even though the CGM functions are not operational. In this case, the CGM trend or Data screens will
not have any information, and you will need to return to the MAIN MENU screen. Press
pump to return to the CGM Menu screen and then press
return to the MAIN MENU screen.
If you are using the Dexcom G4 PLATINUM Sensor and Transmitter with your pump, pressing the
button while the pump is in sleep mode will awaken the pump to one of the CGM Trend graphs or the
CGM Data screen. See Chapter 6 in Section II.
NOTE:
• When viewing your pump display in bright sunlight, it is recommended you shade the screen or
move to a shady area for best visibility.
• If your pump goes to sleep and an error has not been cleared, pressing the
pump to the error screen. This will continue until the error condition has been cleared.
Audio Bolus/ezBolus
This button allows you to program a bolus without looking at your pump. It uses audible tones (or
vibrate pulses) to confirm programming and delivery. If you choose not to activate the Audio Bolus
feature, this button provides a shortcut to the Normal Bolus screen. See Chapter 10 in Section I for
more information.
NOTE: When you first use the Audio Bolus feature, you should always look at the screen to confirm
correct programming until you are comfortable with using audio or vibration feedback to program a
bolus. See Chapter 9 in Section I.
m
WARNING: DO NOT remove the Audio Bolus/ezBolus
pump. Removing the button can damage the pump, compromise the waterproof feature of your
pump, and result in over delivery or under delivery of insulin. This can lead to very low or very
high BG levels.
P130007
41028900 RevB_OB_VIBE_US_EN_MG_R4.indd 6
button on your pump (see image of pump on previous page) adjusts the contrast of
button on top of your pump. Pressing a function button while in Auto-dim mode
™
VIB E I NS U LI N P U M P
® ™
button. See Chapter 9 in Section I.
again with "Main Menu" highlighted to
button from the right side of your
™
6
Dec 2014
button while the
on your
button will awaken the
A114 of A312
11/14/14 2:52 PM