Checking The Interface Connection - GRAPHTEC CS1000EV User Manual

3. PREPARING TO OPERATE THE SCANNER

3.7 Checking the Interface Connection

If the scanner is connected to a system with Adaptec EZ-SCSI DELUXE* installed,
the scanner will be recognized under "Scanner" in the Device Manager.
* EZ-SCSI DELUXE is the software included with the SCSI adapter. For details, see
the SCSI adapter instruction manual.
For Windows 95/98/Me
Open the System window from within the Control Panel in My Computer.
Click on the Device Manager tab to display the list of installed devices. Confirm that the
scanner is recognized under "Other devices."
For Windows NT 4.0:
From the Control Panel window in the My Computer folder, boot the SCSI adapter. Select
the SCSI adapter that is connected to the scanner by double-clicking it, then check that
the scanner is listed below the SCSI adapter and is thus acknowledged.
3 – 16 CS1000EV/1100EV